How To Start Aluminum Door Window Manufacturing Business | SkillsAndTech

Since aluminum is used in all construction areas, the manufacture of aluminum doors and windows in India is profitable in terms of functionality and decoration, as well as stacking.

The manufacture of aluminum doors and windows with different types of frames and accessories is a relatively simple process, and it can also be done in a fully equipped workshop or hardware store.

Doors, windows, grilles, grilles, etc. Aluminum is widely used in residential and commercial spaces, and aluminum is a lighter material that helps create decorative elements, so the demand for aluminum doors and windows is increasing.

Manufacturing of aluminum doors and windows

A person can start any aluminum door and window business, as long as they have a detailed understanding of the business, how to do it, and what investment is needed to run the business. Even if the investment is small and there is no capital, it will be a simple organization. A person should have a thorough understanding of the business they intend to do and the business strategy to follow. Companies that manufacture aluminum doors can supplement various types of accessories and frames.

This is a profitable company with huge opportunities in India. Aluminum used to manufacture such products is becoming a very standard and traditional strategy. Today, various industries use aluminum in their companies, such as office buildings, theaters, buildings, and auditoriums. , Beauty function, etc.

The commercial potential of the manufacturing industry (market opportunity)

India is the fifth largest aluminum producer, with 31% of its aluminum consumption in the power sector and 13% in the construction sector, and it is growing in the solar and industrial sectors.

Aluminum is a widely used material in the construction industry because of its ease of use and corrosion resistance, light weight, durability, beautiful appearance, low maintenance costs and easy manufacturing.

Due to the increasing demand for aluminum in the construction industry, the output of aluminum doors and windows continues to grow, and wood products are now being replaced by aluminum.

The manufacturing company is a small start-up, and you can start a business at home.

Registration and license for the manufacture of aluminum doors and windows.

See Also

Potato Chips Business

Coconut oil Business

Bio Fuel Business

  • Company Registration-The first step to start your low capital business is to register your company with ROC (Registration of Business)
  • SSI hard disk registration: To connect an SSI hard disk to the product, you need SSI to start the registration (not required).
  •  Tread License-You can obtain a tread license from a local government agency to operate your business.
  • GST registration: GST registration is the process of listing your company as a manufacturer to obtain a GST number.
  •  BIS quality standard: the specifications and dimensions of aluminum materials required to manufacture doors and windows.
  • IS (19481961): The specification for aluminum windows covers aluminum processing work used in the construction industry.
  • Environmental pollution certificate: The anodizing process may contain harmful gases and cause environmental pollution. Therefore, it is necessary to attract the attention and review of pollution control agencies.

MSME / SSI records: MSME / SSI records can help you get government benefits.

Manufacturing space demand (location)

The choice of location is an important factor in this business. The production plant needs at least 500 square meters of area.

Find an area where you can easily find skilled workers. We highly recommend it.

You must be on a busy road or near a construction site.

Warehouses with good workshops are also suitable for business.

Raw materials for manufacturing aluminum doors and windows

In the manufacture of aluminum doors and windows, the demand for raw materials depends on the manufacture of certain finished products.

Here we list all the raw materials You have in the shop.

  • Book Type Hand Rail 100 mm Size
  • Chemical For Anodizing
  • Clips
  • Flat 50 mm X 1.5 mm Thick
  • Glass Sheet/ Board 3 mm/4.5 mm
  • Handle Section For Doors
  • 112 mm x50 mm Section
  • 25 mm Sq. Pipe
  • 50 mm X 25 mm Section
  • 63 mm X 38 mm Section

And some other materials, such as rubber, screws, bolts, locks, plastic or corks, hinges, etc., depending on the requirements

Equipment required for manufacturing operations

  • A heavy duty cut-off machine: 2 HP motor
  • Anodizing Plant: Rectifier 500Amps. 30 Volts,
  • Buffing Machines: 2 HP motors
  • Double ended Bench Grinder:75 HP Motor (200 mm diameter)
  • Drilling Machine: 12 mm cap, 0.5 HP motor
  • Portable Electric Drill

Some Other Basic Equipment

See Also:

Brewery Business

Led Light Business

Mineral Water Plant Business

  • A small inventory of extrusions
  • Compound miter saw
  • Glass cutting table
  • Glass panels
  • Hand tools like screwdrivers
  • Nuts and bolts
  • Rubber gasket
  • Hand tools, work benches etc.

Aluminum doors and windows manufacturing process

Fabrication is the process where raw material turns into the parts that used in an assembly process.

There are different types of the fabrication process according to the raw material used and method of fabrication.

Let’s take a look at the types of fabrication processes used in aluminum door and window making.

1) Cutting

Cutting is the most common process used I fabrication. In this process, the metal workpiece is split into two or many pieces there are different types of cutting machinery available in the market.

Metal cutting with the hacksaw is a traditional way to cut metal.

But nowadays Metal cutting is taking place with plasma torches, water jets, lasers machine and other advanced machines.

2) Folding

This operation will perform in the very specific case when some parts need to be bending for making the possible shape.

Dies and bending machine is used to metal folding or metal bending.

3) Machining

This process is used to remove the excess material from raw material, this process is done with a lathe machine or three axes machine.

4) Punching

Punching process is used to convert metal into required shape using die and punching machine.

5) Shearing

The process of making a long cut on a piece of metal. This process is done on sheet metal.

6) Stamping

Stamping process similar to that punching process, but here metal is not cut into pieces only the die is shaped to make a raised portion of material rather than penetrating.

7) casting

This is one of the oldest and flexible methods used in fabrication.

In this process, Metal is poured into the mold to get the desired shape of the mold.

8) Welding

Welding is a process of joining two pieces together, there are various types of welding process exists.

Some popular welding methods are

  • Shielded Metal Arc Welding (SMAW)
  • Gas Metal Arc Welding (GMAW/MIG)
  • Flux Cored Arc Welding (FCAW)
  • Gas Tungsten Arc Gas Welding (GTAW/TIG)

9) Finishing

Once the metal is converted into the required form it needs to paint, silk coating and corrosion coating.

Where can I sell manufacturing?

Last but not least and that is marketing of your business you can represent your business as per your budget using advertising.

Local market

Marketing Your Business: You can represent your business using local advertisement using newspaper and other local media

Online market

See Also:

Chocolate Making Business

Artificial Flower Making Business

Ginger Garlic Paste Making Business

Nowadays represent your business online is important as it will make your business even more visible.

You can directly show your work and price by online and customers can directly contact you regarding your business.

B2B Websites:

Register your business on B2B websites like

  • Alibaba
  • Indiamart
  • Tradeindia
  • Exportersindia

where you can sell your product on bulk orders.

Brand and Uniqueness

Sales Department: You need to hire a sales team or you can promote your manufacturing company yourself.

You can promote and train local customers to let them know that finding a job in the manufacturing industry will help them win the job.

How To Start Aluminum Door Window Manufacturing Business | SkillsAndTech

Facebook Comments
error: Content is protected !!